From ICIHelp8.2
Revision as of 10:45, 2 September 2022 by IDT-1 (Talk | contribs)

Jump to: navigation, search

SSO Configuration

What is SSO Configuration?

SSO is an authentication process that allows users to access multiple applications, after signing in once. Icertis supports SAML, OAuth and WS-Fed as Authentication protocols. This utility will also support configurations for all 3 protocols.

Performing SSO Configuration

1. Click “Configure” tile and click “System Configuration”. The “System Configuration – Self-Service” tab will open.

E sign 8.2 1.png
 
2. Click “SSO Configuration”. The “SSO Configuration” page will open.
 
SSO Config 8.2 1.png
 

WARNING!

The steps mentioned here must be performed by individuals with understanding and expertise of the SSO configuration process. If an incorrect configuration is deployed, users in your organization will not be able to access Icertis Contract Intelligence. If such an event occurs, you will need to contact us for support and rectification.

3. Click “Create” button, from the dropdown select the required SSO Configuration to be done from “SAML2 Configuration”, “WS Fed Configuration” and “OAuth2 Configuration”.

SSO Config 8.2 2.png

SAML2 Configuration

This facilitates you to configure single-sign-on using SAML protocol on the instance. The configuration supports single and multiple service providers. While creating a SAML configuration you need to perform the following steps:

  • Generating the ICI Metadata – This generates the Service Provider (SP) metadata to be shared with the Identity Provider (IdP). You need to select the certificate and then generate the metadata. This builds and downloads the XML Metadata of the ICI SAML Service Provider.
  • Configuration – Fill in the SSO form with the correct IdP details as per the fields provided. If only 1 IdP is created, it will be treated as a Single Service Provider configuration and if multiple IdP’s are created, it will be treated as a Multiple Service Provider configuration.
  • Deploy – Once the configuration is complete, it will be pushed to the instance and updated at the required locations.

How to perform SAML2 Configuration

4. From the “Create” dropdown click “SAML2 Configuration”. The “Create SAML2 Configuration” page will open.

SSO Config 8.2 3.png

5. Select the “Request Signing Certificate” from the dropdown.

SSO Config 8.2 4.png

Note: If no certificate is selected, please ensure to keep the 'Enable SP Initiated Logout' turned off while configuring the Identity Providers in the next step. If it is turned on and you have not selected the certificate, you would need to select a certificate, re-generate the metadata and complete the configuration again to ensure seamless logins for all users.

6. Select the “Assertion Encryption Certificate” from the dropdown.

7. Select the “Bidding Type” from the dropdown.

SSO Config 8.2 5.png

8. Toggle the “Authentication Request Signed” and “Assertions Signed” switch as required.

9. Click “Generate Metadata” button once all the necessary fields are filled. The Metadata file will get downloaded in the system.

SSO Config 8.2 6.png

Note: To reflect the updated information in the file, please ensure to re-generate Metadata, in case any field is modified.

10. Click “Next”. The next page to add “Service Provider” and “Identity Provider” will open.

11. To add a “Service Provider”, click “Add Provider” button next to “Service Provider”. The “Add Service Provider” drawer will open.

SSO Config 8.2 7.png

12. Enter the “Logout URL”. Click “Save”.

13. To add an “Identity Provider”, click “Add Provider” button next to “Identity Provider”. The “Add Identity Provider” drawer will open.

SSO Config 8.2 8.png

14. Enter the “Metadata Location”.

15. Toggle the “Enable SP Initiated Logout” switch.

Note: If Yes, ICI will send the signed logout request message to the IdP and will expect a successful logout response from them. If No, ICM will clear its own session and will redirect user to the logout URL. The logout URL can be an ICI based or a customer specific URL.

16. Select “Unique Claim Type” from the “Select Claim Type” dropdown.

17. Click “Save”. The drawer will close.

18. Once both “Service provider” and “Identity Provider” are added. Click “Save”. The SAML2 Configuration will be configured.

SSO Config 8.2 9.png

WS-Fed Configuration

This facilitates you to configure single-sign-on using WS-Fed protocol on the instance. While creating a WS-Fed configuration you need to perform the following steps:

  • Configuration - Fill in the SSO form with the correct IdP details as per the fields provided.
  • Deploy – Once the configuration is complete, it will be pushed to the instance and updated at the required locations.

How to Perform WS-Fed Configuration

  • Enter the “Realm” details, “Issuer” details, “Metadata URL”.
  • Realm: This name is the unique identifier that is included in assertions sent to federation partners.
  • Issuer: Specifies the URL at which the IdP or service provider is providing WS-Federation services.
  • Metadata URL: The URL where metadata document is hosted, to be shared with Icertis.

SSO Config 8.2 10.png

20. Select the “Unique Claim Type” from “Select Unique Claim Type” dropdown.

21. Click “Save”.

OAuth2 Configuration

This facilitates you to configure single-sign-on using OAuth protocol on the instance. While creating an OAuth configuration you need to perform the following steps:

  • Configuration - Fill in the SSO form with the correct IdP details as per the fields provided.
  • Deploy – Once the configuration is complete, it will be pushed to the instance and updated at the required locations.

How to perform OAuth2 Configuration

22. Enter “Client ID”, “Client Secret”, “Scope”, “Authorization URL”, “Token URL”.

  • Client ID: Identifies the client that is making the request. The Client ID obtained from the IdP after registering application with OAuth server and will be provided by IdP.
  • Client Secret: Identifies the client secret that is making the request. The client secret obtained from the IdP after registering application with OAuth server and will be provided by IdP.
  • Scope: Mechanism to limit an application's access to a user's account. An application can request one or more scopes. This information is then presented to the user in the consent screen, and the access token issued to the application will be limited to the scopes granted.
  • Authorization URL: The URL to which ICI will send the Authorization Code request.
  • Token URL: The URL to which ICI will send an Authorization Code to get an access token from IdP.

SSO Config 8.2 11.png

23. Enter the “Resource Owner Profile URL”, “IDP Logout URL”, “Redirect URL” and “Issuer” details.

  • Resource Owner Profile URL: The URL provided by IdP, which ICI will use to retrieve extra information about the user. This is an optional field.
  • IDP Logout URL: The URL provided by IdP to which ICI will send the logout request message.
  • Issuer: The OAuth issuer URL.

SSO Config 8.2 11.png

24. Enter “Provider” details and “Post Logout Redirect URL”.

25. Select “Respond Mode” from “Select Response Mode” dropdown.

26. Select the required “Response Type”.

  • Response Type: Informs the Authorization Server of the mechanism to be used for returning Authorization Response parameters from the Authorization Endpoint. 'Code' indicates requesting an authorization code, 'Token' indicates requesting an access token (implicit/grant).

27. Enter “Tenant” details and “Policy ID”.

28. Select the “Unique Claim Type” from “Select Unique Claim Type” dropdown.

29. Click “Save”

Deploying SSO Configuration

Once the configuration is ready for deployment, user will be able to deploy the current configurations

1. Click “Deploy” from the three dots menu, user will be asked to enter external UPN of its current user.

Once the user enters the external UPN and clicks on deploy the configurations, the configuration will get deploy on the server which will change the SSO type appointing to the new configuration.

Note: Once the user logs in to the system with new SSO it needs to update external UPN of all other users present in the system using bulk update functionality.

Editing SSO Configurations

Note: Only Non-Active configurations can be edited. Active configurations will be in read-only mode.

1. Click three dots next to the SSO configuration you want to edit, on the SSO Configuration index page.

SSO Config 8.2 13.png

2. The Edit SSO Configuration page will open, make the required edits and click “Save”.

SSO Config 8.2 14.png

 

 

 

Retrieved from "https://iciwikiapac.icertis.com:443/ICIHelp8.2/index.php?title=SSO_Configurations&oldid=24963"